週次 |
日期 |
單元主題 |
第1週 |
2/20 |
Introduction, Forming student groups, Basic devices (LED, lens, mirror, grating, photodiode detector, etc.), Budgeting, Thinking, etc. |
第2週 |
2/27 |
Measure the light reflectance of a flat surface, including the dependences of the incidence angle and polarization. |
第3週 |
3/06 |
Measure the light reflectance of a soap film, including the time evolution. Deduce the thickness of the soap film from the reflectance data. |
第4週 |
3/13 |
Dispersion Grating: Wavelength range and resolution
Measure (and estimate or checked with a model) the relationship between the source slit width and the spectral resolution (in nm) of a diffraction grating.
Goals of Week 4 should also include:
(i) Measure the input and output angles of the diffracted light
(ii) Verify your results with the diffraction equation
(iii) Further verify your results by using a laser pointer
(iv) Estimate the ideal-case wavelength resolution for a given slit width at your experimental condition
According to https://www.answers.com/Q/What_is_the_track_pitch_or_groove_spacing_on_a_CD_DVD_or_Blu-ray#ixzz1noOSlNQ3
http://wiki.answers.com/Q/What_is_the_track_pitch_or_groove_spacing_on_a_CD_DVD_or_Blu-ray#ixzz1noOSlNQ3
The groove spacing is also called the "track pitch". It is the distance between each track. Here is a list of the track pitches of some common formats.
CD 1.6 ∓0.1 μm
DVD 0.74 μm
Blu-ray Disc 0.32 μm |
第5週 |
3/20 |
Measure the absolute brightness (photons per unit emitting area per unit solid angle) of a LED light source. |
第6週 |
3/27 |
How to use a CO2 laser cutter |
第7週 |
4/03 |
溫書假 |
第8週 |
4/10 |
Build a grating spectrometer (400 to 700 nm; near IR ~ 900 nm is also possible), including
A light source (white light LED or tungsten lamp)
Light manipulating optics (lens on the LED or others)
A grating (CD or DVD)
A detector (your smart phone or photodiode)
|
第9週 |
4/17 |
Build a grating spectrometer: continue
Light Source Test: measure the number of photons through the slit within a reasonable solid angle (f/4光圈). |
第10週 |
4/24 |
Pulsed LED time profile measurement |
第11週 |
5/01 |
How to use a 3D printer |
第12週 |
5/08 |
concentration calibration by absorption spectroscopy |
第13週 |
5/15 |
wavelength calibration |
第14週 |
5/22 |
time constant, integration time and signal-to-noise ratio |
第15週 |
5/29 |
device optimization and demonstration and presentation. |
第16週 |
6/05 |
device optimization and demonstration and presentation. |
第17週 |
6/12 |
device optimization and demonstration and presentation. |